| 品牌 | ELEROL | 型號 | NC |
| 類型 | 機械式溫度控制器 | 測量范圍 | 0-60（℃） |
| 等級 | 1 | 測量誤差 | 1（℃） |
| 開口尺寸 | 30（mm） | 安裝型式 | 道軌試 |
| 輸出信號 | 30（mA） | 工作電壓 | 230（V） |
| 外形尺寸 | 60X33X43（mm） |
技術參數
電子恒溫器是用來調節120-250VAC 的設備,開關可以轉換加熱或制冷接觸器.
技術數據
開關溫度公差 大約3K
連接類型 恒溫雙金屬
接點類型 轉換接觸
接觸電阻 < 10m0hm
產品使用期限 >100 000次
開關容量 250VAC,10(2)A
120VAC,15(2)A
DC 30W
EMC acc,to EN 55014-1-2,EN 61000-3-2,EN 61000-3-3
連接 2接點線徑2.5mm.螺絲扭力0.8Nm
固定方式 截面為35mmDIN路軌，EN50022（或?yàn)槌隹谶^(guò)濾EF118系列）
外殼材質 塑料根據UL94 V-0，淺灰色
尺寸 60X33X43mm
重量 大約。40g
貼合位置 簡易
操作/保持溫度 -45到+80。C(-49到+176。F)
護等級 IP20
- Large setting range
- all size
- Simple to mount
- High switching performance
KTO 011: Thermostat (rmally closed); conta breaker for regulating heaters.
KTS 011: Thermostat (rmally open); conta maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.
| Switch temperature difference | 7K (&plun; 4K tolerance) |
| Sensor element | thermostatic bimetal |
| Conta te | snap-aion conta |
| Service life | > 100,000 cycles |
| Max. Switching capacity | 250VAC, 10 (2) A |
| 120VAC, 15 (2) A | |
| DC 30W | |
| Conneion | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating / Storage temperature | -45 to +80°C (-49 to +176°F) |
| Proteion te | IP20 |
Prerequisite for a clean operation of your components is the right climate in your enclosure. The right climate can be attained by a temperature and moisture control system which is put in place. Thermostats and Hygrostats are used for the control of heaters, filter fans, heat exchangers and air conditioning equipment. They aivate when set temperature or humidity values are exceeded or have fallen below.
