- 工作形式：
- 電容式液位傳感器CPA01
電容式液位傳感器CPA01 Filling level measurement with liquids ;
Characteristics CPA01
| Analogous output 4-20mA proportional to filling level 4-20mA比例模擬信號 |
| Max. measurement range 1800mm, also suitable for short measuring 測量范圍1800mm，也適用于短量程 |
| Simple calibration at keypress 校準簡單 |
| Operating pressure max. 16 bar 工作耐壓：16bar |
| Vertical installation 垂直安裝 |
| Thread BSP1" and protective tube in stainless steel Ti316 /PVDF, Material housing stainless steel 304 螺紋： BSP1,不銹鋼保護管，外殼304不銹鋼 |
| Electrical connection : Cable outlet, plug M12 電氣連接：電纜連接或M12插頭 |
| Measuring accuracy 1% of measurement range 測量：測量范圍的1% |
| Tube and sensor beam are exchangeable and can be shortened 探測器長度可變 |
Calibratin 0% and 100% is made at keypress (TEACH IN). Application（應用） For liquids with low dielectricity, such as oil, diesel, emulsions, water, etc., suitable for metal and plastic container 技術參數
| Supply voltage 供給電壓 | 12-32VDC |
| output 輸出 | 4-20mA ( 2 wire ) |
| Process connection 過程連接 | Standard: BSP 1"of 316 Ti /PVDF, other types on request |
| Connecting box 接線盒 | D67x55mm of stainless steel 304, IP65 |
| Electrical connection 電氣連接 | plug M12or cable outlet |
| Medium temperature 介質溫度 | -30°C up to +100°C, |
| Environmental temp 環境溫度 | -30°C up to +70°C, |
| Max. pressure 耐壓 | 1.6 MPa |
| Sensor beam 波長 | Diameter 5mm made in of stainless steel, coated with elastomer - hose |
| Tube length L 管子長度 | max. 1800 mm |
| Accuracy | 1% of measuring length |
