1. GB11158高溫試驗箱技術條件
2. GB10589-89低溫試驗箱技術條件
3. GB10592-89高低溫試驗箱技術條件
4. GB/T10586-89濕熱試驗箱技術條件
5. GB/T2423.1-2001低溫試驗箱試驗方法
6. GB/T2423.2-2001高溫試驗箱試驗方法
7. GB/T2423.3-93濕熱試驗箱試驗方法
8. GB/T2423.4-93交變濕熱試驗方法
9. GB/T2423.22-2001溫度變化試驗方法
10. IEC60068-2-1.1990低溫試驗箱試驗方法
11. IEC60068-2-2.1974高溫試驗箱試驗方法
12. G150.3高溫試驗
13. G150.4低溫試驗
14. G150.9濕熱試
技術參數:Technical parameter
其他說明
|
型號 Te |
TK-H-T27 | TK-H-T50 |
|
內部尺寸:w長x H高x D深(cm) Internal size |
30x30x30 | 45x40x30 |
|
外部尺寸:w長x H高x D深(cm) External size |
100x78x76 | 100x60x60 |
|
溫度范圍 Temperature range |
-40℃ ~ +100℃/+150℃ | |
|
濕度范圍 Humidity range |
20% ~ 98%R.H. | |
|
溫濕度解析/均勻度 Analytic accuracy /evenness degree of humiture |
&plun;0.1℃;&plun;0.1%R.H./&plun;1.0℃;&plun;3.0%R.H. | |
| 溫濕度控制/波動度Control accuracy /evenness degree of humiture | &plun;0.1℃;&plun;2.0%R.H./&plun;1.0℃;&plun;2.0%R.H. | |
| 升溫/降溫時間Temperature rising/falling time | 約4.0℃/分鐘;約1.5℃/分鐘 | |
| 內外部材質Inner and outer material | 外部面板及內箱全為SUS 304#不銹鋼.External panel and inner tank is SUS 304 # stainless steel. | |
| 保溫材質Insulation material | 高密度氯基甲酸乙醋泡沫緣體材料Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials | |
| 冷卻系統Cooling system | 風冷式壓縮機Air cooling compressor | |
| 保護裝置Protection device | 溫,過載,壓,漏電,斷水,短路保護Overheat, overload, overpressure, leakage, water-break, short-circuit protection | |
| 配件Parts |
記錄儀,機軟件,觀視窗,測試孔,箱內照明燈,隔板,干濕球紗布 Recorder, upper computer software, watching window, Testing hole, lighting within tank, partition plate, wet&dry bulb gauze |
|
| 控制器control panel | 韓國TEMI溫濕度控制器South Korea TEMI temperature and humidity controller | |
| 壓縮機Compressor | 法國原裝"泰康"壓縮機 France Tecumseh Brandimported with original packaging compressor | |
| 電源Power | 1Φ 220VAC&plun;10% 50/60Hz & 3Φ 380VAC&plun;&plun;10% 50/60Hz | |








